We repair all brands/models Dryers in Concord, CA such as Kenmore Dryers,
Whirlpool Dryers, GE Dryers, Admiral Dryers, Amana Dryers and many
more. (view the complete brands list
we work on). We are open 24 hours a day, 7 days a week for Concord, CA
dryer repairs and there is no extra charge for the weekend or night
dryer repair appointments. Our service call is Free with the dryer
repair and all the work is guaranteed for 1 year.
We provide dryer repair to all Concord, CA zip codes and
surrounding cities. The following areas correspond to our appliance
View the list of our
We have been in Concord, CA Appliance Repair business for eight years.
Take a look at what some of our previous clients have
had to say about us. For immediate Concord, CA Dryer repair service
call us 24/7 out our toll free number:
You can also can contact us by the email
for your Concord, CA dryer repair appointment. Just send us your name,
a brief description of the Dryer problem and your contact information.
Please read these preventative and easy-to-repair tips.
However if your Dryer problem cannot be resolved with our easy tips,
consider calling us for an appointment. We will be happy to help.
The clothes dryer consists of a cabinet surrounding a dryer motor-driven
drum. Clothing placed inside the dryer drum tumbles through air
which has been warmed by a heater and pulled into and through the
dryer drum by an exhaust fan. These three basic components heat,
air flow, and tumbling action must be present for a clothes dryer
to operate properly. Actually, the clothes dryer is a very simple
appliance. When dryer is operating properly, it can dry your clothing
quickly and safely, but the dryer must be kept in proper operating
condition and it must be used correctly.
The dryer motor that drives the drum is usually located at the
base of the dryer. You can get at it by removing either the dryer
front panel or the dryer rear service panel, but be sure to unplug
the dryer before attempting any motor service or repairs.
In the of a gas dryer, be sure that the gas line is turn off before
you open up the dryer or pull it away ferrite wall. The dryer motor
drives a belt, which in newer dryers completely surrounds the outside
drum. Many of these dryer belts have an odd appear almost flat like
a rubber band. If you look a belt closely, however, you can see
that it has number of grooves on one side to give the belt gripping
power. Near the point where the dryer belts attached to the small
motor pulley, a dryer spring-load wheel (called an idler) maintains
tension on the belt as the drum turns. Since the drum itself acts
as a very large pulley and the dryer motor has a very small one,
tremendous speed reduction is obtained. Most dryer drums rotate
at around 50 rpm, any faster and centrifugal force would tend to
hold the clothing against the side of the drum rather than allowing
it to tumble.
The dryer's heat source can be either electric heating element
or a gas burner. In either case, the dryer heat source is usually
located within a boa that has both an inlet and an outlet. Air flows
in through the box where it is heated, and then it is blown into
the dryer drum by a fan. Since the dryer drum is a sealed container
when the dryer door is closed, the exhaust fan must pull air through
the opening and into the heater box to replace that expelled by
the fan. The heated air flows into the dryer drum, where it absorbs
moisture from the clothing, and it is then exhausted to the outside
of your home through the vent. The heat level is quite important.
Heat must be controlled at the proper temperature for the type of
clothing that is in the dryer.
If you need professional assistance for your Concord, CA Dryer repair
needs, call us 24/7:
Or send an appointment request online at email@example.com
To do so, please specify your name, address and a brief nature of
the Dryer problem. Once we receive your request we will contact
you as soon as possible.